FEATURED Articulating Tilting Television Wall Mount For 32″ – 52″ TVs
- Universal fit for 32″-52″ televisions
- Swivels and tilts up and down
- Extends out from wall and compresses flat
- Heavy-duty construction
- Includes installation wrench, hardware package, and instructions
This articulating, tilting TV wall mount is for LED, LCD, Plasma and other flat panel displays measuring between 32″-52″ diagonally. The mount fits many sizes and supports VESA mounting standards of 100mm x 100mm, 100mm x 200mm, 200mm x 200mm. When using included extensions that are easily added with two screws each, supports 200mm x 400mm, 300mm x 300mm, and 400mm x 400mm. The easiest way to ensure fit of the mounting pattern is to find out the VESA pattern for your panel either online or by measuring between the screw holes on the rear of the TV or panel (100mm is about 4″). Mount compresses to 1.75″ and extends up to 19.25″ from wall. Articulating arm will also allow for offset mounting, where the panel (when extended out on the arm) can be shifted horizontally up to 17.5″ left or right. Specifications: Fully rated for up to 80 pound displays; Tilts from -2 degrees (up/backward) to +10 degrees (down/forward); Swivels up to 180 degrees; RoHS, CE, and ISO-9001 certified; Limited li
Comments
2 comments
Kenny Parada
September 19, 2014
Five Stars,
0
Was this review helpful to you?
|Anonymous
September 19, 2014
Must Hit Stud – TV not centered where bracket is mounted to wall,
Keep in mind that TV not centered where bracket is mounted to wall. I thought I could use some heavy duty anchors, but the bracket is so small that doesn’t spread the strain over enough surface area. I ended up using the mount, but my TV is a bit off center from where I would like it.
0
Was this review helpful to you?
|Write a Reply or Comment: